Injector Cleaning
While cleaning injectors, whether it be with pour or pressurized cleaner, it is always convenient to follow these steps to make the procedure most effective:

• Clean the injectors at the engines operating temperature
• Disconnect or deactivate the fuel pump.
• Always verify that the pressure gauge reading is the one recommended by the vehicle’s manufacturer.
• To avoid pressure loss, always connect the pressurized bottle to the equipment in a completely vertical way and with the connector valve pointing down.
• Prior to opening the valve, make sure that everything is connected properly and securely.

It is recommended to clean the injectors at least every 12,000 miles.

Brake Squeaking
Typically this problem is caused by inadequate brake and/or drum lining as well as dust and other pollutants generated in the process of braking. These may be eliminated by the simple use of these three products
• Brake System Cleaner: Product that when applied, removes brake fluid residues, dust from the drums and soil.
• Brake Silencer: Product that aids in attaching the brake pad to the caliper, this helps eliminate the noise caused but the vibrations during braking.
• Brake Anti-squeak: Product designed to fill in surface scratches found between the drums/liners and brake pad – this contributes to smoother braking without noise.

It is recommended to use this product every time the brake system is being serviced.

Motor Flush
Before performing an engine flush, it is suggested to check the following:
• Verify engine oil levels.
• Once the Motor Flush is applied and the ignition is turned on, do no leave on idle for more than three minutes.
• Drain the oil normally afterwards.

This product is of significant value especially for vehicles that have not had regular or scheduled oil changes. As a result, a considerable amount of residues is likely found in the interior of the engine. Notwithstanding the above, it is recommended to use this product with every oil change.

Fuel Injector Cleaner (Tank)
For optimal use of this product, it is suggested that it be applied with at least a half tank of fuel. This will maximize the preventive power of the fuel tank cleaner.

Buffing and Polishing of Automotive Paint
To facilitate and obtain the best results in the process of buffing and polishing while decontaminating the paint, always perform this task in the shade, away from the sun and with the car surface cool. To keep the automobiles paint in best conditions, it is advisable to perform the decontamination, buffing, polishing, and paint protection every six months.

Does your air conditioning have an unpleasant smell or odor?
Artlux offers “A/C Cleaner”, a bactericide, fungicide, and germicide that when applied in the air conditioning system, eliminates the bad odors that are caused by fungi and bacteria. We also offer a fragrance that when applied frequently, maintains a fresh and pleasing new car smell in the cars interior. It is recommended to use this product every six months.

Tekel Fabric Protector
Remember that Arlux has an excellent product that helps protect automobile, home furniture upholstery and fabrics. For best use, follow these suggestions:
• Always apply the product on clean or recently washed and dried fabrics.
• Apply the product in two stages; one in a vertical direction, the other in a horizontal direction. This maximizes the effectiveness of the products as well as an optimal protection of the fabric.
• Always apply this product in a well ventilated areas and allow for it to dry completely (about 30 minutes) before making use of the treated fabric.

Depending on the frequency of use, this product is recommended to be applied every six months.